Make Christmas Tree OrnamentsWith Wallpaper Scraps
Items Needed:
Wallpaper scraps
Scissors, straight and pinking edged
beading needle
thread
tiny beads
white glue
scrap ribbon or string
tape
quilt batting or other stuffing material
How to make these:
1. Cut shapes from your wall paper scraps using the straight edge scissors, and leave an enough design to cut later with pinking scissors. You will need a two pieces of paper for each ornament (front and back.
2. With your top piece, or front piece of ornament paper, thread the beading needle, and carefully, and gently sew beads to the front in any design or pattern you wish. Be very careful to not rip the wallpaper with your needle. You can use a tiny piece of tape to secure the thread on the backside of it. Knotting the thread is too difficult, as you will rip the ornament.
3. Place a thin line of glue around the backside edges of the cut wallpaper shapes, but before you place them together, lay the ends of the scrap ribbon inside for the hanger. Also stuff a tiny bit of quilt batting, or other scrap materials inside to give the ornament shape. You will need very little stuffing material.
5. Allow the ornament to completely dry.
6. Optional: Trim the edges with pinking scissors or other decorative edged scissors.
These take a bit more time and patience to make, but are fun to give as Christmas gifts, participate in an ornament exchange, or tie onto a larger gift. These are very light and are inexpensive to mail for gift giving as well.